Format password menu, Disc password menu – Panasonic WJ-DR200 User Manual
Page 34
-32-
LOGICAL FORMAT
FORMAT PASSWORD
*
VOLUME LABEL
*
DISC PASSWORD
*
START : PRESS SET KEY
2 Move the cursor to the FORMAT parameter in the
LOGICAL FORMAT menu by pressing the
or
button.
3. Select PASSWORD by pressing the
or
but-
ton, then press the
SET
button. The FORMAT PASS-
WORD table shown below appears on the monitor
screen.
FORMAT PASSWORD
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
1 2 3 4 5 6 7 8 9 0
CLEAR
(
☞
SET)
4. Compose the Format Password as described for the
Setup Password above.
5. Press the
SET UP/ESC
button for about 2 seconds
to apply the setting and exit the setup menu.
●
Disc Password Menu
1. Press the
(–)
and
(+)
buttons simultaneously for
about 2 seconds. The LOGICAL FORMAT menu
shown below appears.
2. Move the cursor to DISC PASSWORD in the LOGI-
CAL FORMAT menu by pressing the
or
but-
ton, then press the
SET
button. The DISC PASS-
WORD table shown below appears on the monitor
screen.
LOGICAL FORMAT
FORMAT EXECUTE
VOLUME LABEL
*
DISC PASSWORD
*
START : PRESS SET KEY
SET_UP PASSWORD
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
1 2 3 4 5 6 7 8 9 0
CLEAR
(
☞
SET)
3. Move the cursor on the desired character in the
table by pressing the
,
,
or
button.
4. Press the
SET
button to pick up the character, and
place it it in the password area.
5. Repeat the above procedures 3 and 4 until the
password is completed.
6. If a wrong character is selected, press the (+) or (–)
button to move the cursor in the password area.
Then press the
SET
button to overwrite the charac-
ter selected in the table.
Note:
Press the (+) button to move the cursor to the
right, or press the (–) button to move the cursor
to the left.
7. To clear the characters in the password area, move
cursor to CLEAR in the table by pressing the
or
button, then press the
SET
button.
8. Press the
SET UP/ESC
button for about 2 seconds
to apply the setting and exit the setup menu.
●
Format Password Menu
1. Press the
(–)
and
(+)
buttons simultaneously for
about 2 seconds. The LOGICAL FORMAT menu
shown below appears.