Installation, Installing the battery in the handset, Battery charge – Panasonic KX-TG2346 User Manual
Page 10: Battery strength
Installation
10
Installing the Battery in the Handset
Insert the battery (
1
), and press it down until it snaps into the compartment (
2
).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 11). Close the cover and charge the battery for
6 hours.
Battery Charge
Place the handset on the base unit.
Charge for 6 hours before initial use.
• The unit beeps once, the CHARGE
indicator lights, and “Charging” is
displayed.
• When the battery is fully charged,
“Charge completed” is displayed.
Battery strength
You can confirm battery strength
on the handset display.
Battery strength is indicated by
the icons shown in the chart to
the right.
Display prompt
Battery strength
5
Fully charged
6
Medium
7
Low
074
(flashing)
Needs to be recharged.
8
Discharged
1
2
OR
CHARGE
Indicator
PQQX13987YA.book 10 ページ ２００４年２月５日 木曜日 午前９時３分