Panasonic KX-TG2346 - Manual (Page 30)

Caller ID Service
30
Talking Caller ID
To use this feature, you need to subscribe to Caller ID. For further information,
please contact your telephone company.
• If the unit does not receive Caller ID information, the unit will announce “Call from
out of area”, “Call from private caller”, or “Call from long distance”. If a call is received
from an area where name display service is not available, “Number available” will
be announced.
• If the ringer volume of the handset and base unit is off, caller names will not be
announced. The announcement is heard at the handset or base unit ringer
volume (p. 17, 18).
• If this feature is not turned on, caller names will not be announced (see below,
p. 31).
• If you have Call Waiting service, the second caller’s information will be displayed
but not announced (For Call Waiting Service Users, page 44).
• Name pronunciation may vary. Name pronunciation quality is based on names
most commonly used in the United States.
• The unit will announce each letter of abbreviations, such as “Co.” and “Inc.”.
• Caller ID supports names of up to 15 letters. If the caller’s name has more than
15 letters, the name will not be displayed or announced correctly.
• If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your
telephone company with 2 or 3 consecutive rings, your unit may mute one or more
of the rings in order to announce the name of the caller.
To turn Talking Caller ID on or off
You can turn Talking Caller ID on or off for the handset and base unit separately. If
this feature is off, the unit will not announce caller names. The factory preset is ON.
Handset Talking Caller ID feature
1 Press [MENU].
2 Scroll to “Talk Caller ID” by pressing [d]
or [B], then press Select.
3 Select “Off” or “On” by pressing [d] or [B].
4 Press Save, then press [OFF].
Handset
Talk Caller ID
Back Select
K dB L
Talk Caller ID
:On
Back Save K dB L
PQQX13987YA.book 30 ページ ２００４年２月５日 木曜日 午前９時３分