Panasonic KX-TG2346 - Manual (Page 49)

For assistance, please call: 1-800-211-PANA(7262) 49
Automatic Answering Operation
Ans
w
ering System
Monitoring Incoming Calls
While a caller is leaving a message, you can monitor the call through the base unit
speaker.
• To increase the speaker volume while monitoring, press VOLUME [>].
To decrease the volume, press VOLUME [<].
To answer a call while monitoring, press [C] or [s] on the handset.
To turn the incoming call monitoring feature off
When the base unit is not in use, press [GREETING CHECK], then press
VOLUME [<] repeatedly until “0” is displayed. (Make sure the Answering
System is turned on.)
OR
While monitoring, press VOLUME [<] repeatedly until “0” is displayed.
• If the incoming call monitoring feature is turned off, it will remain off when the next
call is monitored.
• If you adjust the speaker volume while playing back messages, the speaker
volume for monitoring will be turned on again. To turn the speaker volume off, see
“To turn the incoming call monitoring feature off” of above step.
Base Unit
PQQX13987YA.book 49 ページ ２００４年２月５日 木曜日 午前９時３分