Panasonic KX-TG2346 - Manual (Page 8)

Location of Controls
8
Handset soft keys
• When a function name does not appear above a soft key, the soft key has no
function.
Handset navigator key
Base unit display
1 “ O ” indicates the base unit ringer is off (p. 18).
2 “ ” flashes when no new messages can be
recorded. Erase unnecessary messages (p. 53).
3 “E” flashes until you set the date and time, and
flashes after a power failure. If it is flashing, set the
date and time (p. 14).
4 “ ” functions as follows.
• “ ” displays when a handset is operating the Answering System.
5 Message counter shows:
—the total number of recorded messages. If the recording time is set to
“Greeting only”, “ ” will be displayed (p. 22).
—the selected volume level while you are adjusting the volume (p. 20).
—“
” when your greeting message or memo message was not recorded
correctly (p. 20, 54).
Two soft keys are used to select functions displayed
directly above each key. Functions displayed above the
keys will change depending on the state of use.
On this sample display, “ (VE)” and “Mute ” are
displayed above soft keys.
Scrolls up [B] and down [d] the function menu, the
Caller List and the phone book.
Increases [B] or decreases [d] the handset ringer and
receiver/speaker volumes.
Throughout these Operating Instructions:
• The soft keys are indicated by what is displayed above the keys.
Ex. “Press Mute.” indicates “Press the soft key below Mute ”.
• The navigator key is indicated by the arrows [d] or [B].
Off (invisible) The line is free.
On The line is being used.
Flashing
A call is on hold on the handset or the Answering
System is answering a call (p. 48).
Flashing rapidly A call is being received.
J 5
Talk
00-00-32
(VE) Mute K L
K L
Pressing the right soft key selects mute “Mute ”.
L
Pressing the left soft key selects Voice Enhancer “ (VE)”.
K
FULL
RINGER
OFF
LINE IN USE
1
2
4
3 5
FULL
LINE IN USE
IN USE
PQQX13987YA.book 8 ページ ２００４年２月５日 木曜日 午前９時３分