Search functions, Jet navigator, 1] press [navi – Panasonic VP-31GN User Manual

Page 20

Advertising
background image

20

Search Functions

≥Select the unit viewing channel (or the AV input) on the TV.
≥Switch [VHS/TV/DVD] to “VHS”.

This unit can display a list of the recorded programmes on the inserted video cassette on the TV screen.
You can then select the desired programme, and this unit will quickly reach its beginning and start
playback.

[1]

Press [NAVI].

≥When pressing [NAVI] during playback, the playback stops

and the Jet Navigator list appears.

[2]

Press [NAVI] several times to select

the programme.

After 3 seconds, the unit starts to search for the beginning of
the selected programme and the playback will start
automatically.
≥Every time you press [NAVI], the programme shifts above.

¬ To cancel the Jet Navigator list
Press [MENU].

¬ To delete the Jet Navigator data of a single video cassette tape
Keep [CANCEL/RESET] pressed for more than 5 seconds while the Jet Navigator list appears.
“- -” appears on the list.

¬ To delete all the Jet Navigator data stored in the unit’s memory (

lpage 24)

¬ To Demonstrate the Jet Navigator Function
Keep [NAVI] pressed for more than 5 seconds without inserting a tape.

Notes:
≥The Jet Navigator programme list displays up to 14 programmes. If you have already stored 14

programmes on a tape and then store another one, the oldest item is replaced.

≥Signals approximately 10 seconds before and after the current tape position are checked. During

checking, “CHECKING JET NAVIGATOR DATA.” is displayed on the TV screen.

≥Checking cannot be performed properly where there are no signals, such as unrecorded portions of the

tape. In this case, press [NAVI] at a portion of the tape where a programme has been recorded on this
unit. When a signal can still not be found, the message “CAN NOT FIND JET NAVIGATOR DATA.”
appears on the TV.

≥The Jet Navigator list is stored in each tape. Up to 20 tapes and 50 programmes can be registered.
≥“REMAINING PROGRAM 0 DELETE JET NAVIGATOR DATA.” appears when you try to store more

than 50 programmes. The new item is added and the oldest item is deleted.

≥“REMAINING CASSETTE 0 FOR JET NAVIGATOR DELETE JET NAVIGATOR DATA.” appears when

you try to store items for more than 20 tapes. Programmes recorded without deleting data as instructed
are not registered in the list.

≥The list does not appear when playing tapes recorded on other equipment.
≥When recording over the same location on a tape, it may not work correctly.

VHS/DVD/TV

VHS/DVD QUICK REPLAY DUBBING

REC

CH

VOLUME

TV

TV

VHS

DVD

1

2

3

7

8

9

0

4

5

6

SLOW/SEARCH

NAVI

TOP MENU

MENU

RETURN

PROG/CHECK

PROG PLAY

DISPLAY

JET REW

TIMER

ENTER

PLAY
LIST

INDEX/SKIP

OUTPUT

TRACKING/V-LOCK

AV

DIRECT

NAVIGATOR

CANCEL/RESET

ANGLE/PAGE

INPUT SELECT

MUSIC w/ PICTURE

PICTURE

SPEED

AUDIO

POSITION MEMORY

SETUP

ZOOM

REPEAT

PLAY MODE

A.SRD

CINEMA

SUBTITLE

VHS/DVD

-/- -

VHS/
TV/
DVD

MENU

NAVI

PROG
PLAY

ENTER

CANCEL/
RESET

Jet Navigator

To save Jet Navigator data

≥The tape length of the inserted cassette must be set correctly. (

lpage 24)

≥The unit must not be in the timer recording standby mode.
≥A programme of at least 15 minutes must be recorded on the tape.

1) Press [MENU] to display the VHS MENU.
2) Press

[

34] to select “OPTION” and then press [ENTER].

3) Press

[

34] to select “JET NAVIGATOR” and then select “ON”

with [

2 1].

4) Record programmes (

lpage 16–19).

The unit makes the list as you record.

OPTION 1/2

TAPE SELECT

[AUTO]

NTSC INPUT SELECT

[AUTO]

NTSC PB SELECT

[onPALTV]

JET NAVIGATOR

[ON]

DELETE NAVIDATA

[NO]

OSD REC

[OFF]

OSD [AUTO]
OUT[VHS/DVD] [AUTO]

END :MENU

SELECT:

END : MENU

JET NAVIGATOR

SELECT : NAVI,

1

DATE CH ON

CATEGORY

1 0 / 1 8 1

22:3 0 M U S I C

1 0 / 1 9 24

15:00 S P O R T

1 0 / 2 1 5

22:1 5

1 0 / 2 3 A2

20:02

1 0 / 2 6 4

19:1 0 E D U C A

1 0 / 2 7 2

20:02

1 0 / 2 7 1 2

20:3 0

1

Time Stamp Function

When playback starts after searching with Jet Navigator function or
index search function (

lpage 21), recorded programming data (called

Time Stamp) appears on the TV screen for approx. 5 seconds.

Note:
≥Time Stamp does not appear if the beginning of the Jet Navigator data

is not recorded 10 minutes before and after the current tape position
even when index signals are recorded.

CH 2

10/29. SA

ON 20:02

VP31GCGCS.book 20 ページ 2 0 0 3 年 7 月 3 0 日   水曜日   午後 8 時 2 8 分

Advertising