Panasonic VP-31GN - Manual (Page 36)

36
To Enjoy Movies and Music More
≥Select the unit viewing channel (or the AV input) on the TV.
≥Switch [VHS/TV/DVD] to “DVD”.
[DVD-V[
When you have connected equipment through this unit’s OPTICAL DIGITAL AUDIO terminal (
lpage 9),
change the settings for “PCM Down Conversion”, “Dolby Digital”, “DTS Digital Surround” and “MPEG”
(
lpage 41). You can enjoy the powerful movie theater and hall-like sound.
................................................................................................................................................................................................................
[1] Press [SETUP].
................................................................................................................................................................................................................
[2] Select “Audio” tab with [ 2 1].
................................................................................................................................................................................................................
[3] Press [ 34] to select the item
( lbelow) and press [ENTER].
................................................................................................................................................................................................................
[4] Press [ENTER] and then [SETUP] to
end the settings.
Select how to output audio with a sampling frequency of 96 kHz.
≥Select “Yes” if the equipment you connect cannot process signals with a sampling frequency of 96 kHz.
No (Initial setting): Output as 96 kHz
Yes: Converted to 48 kHz
Note:
≥Signals are converted to either 48 kHz despite the above settings if the signals have a sampling
frequency of over 96 kHz, or the disc has copy protection.
Bitstream (Initial setting for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Initial setting for DTS Digital Surround and MPEG ¢ ):
Select if the equipment you connected cannot decode the signal.
¢MPEG: for NV-VP31GC only
IMPORTANT
If the equipment you connected cannot decode the signal, the setting must be changed to PCM. If
not, signals the equipment cannot process will be output by this unit, causing high levels of noise
which can damage your hearing and the speakers.
VHS/DVD/TV
VHS/DVD QUICK REPLAY DUBBING REC
CH
VOLUME
TV TV
VHS DVD
1 2 3
7 8 9
0
4 5 6
SLOW/SEARCH
NAVI
TOP MENU MENU
RETURN
PROG/CHECK PROG PLAY
DISPLAY
JET REW TIMER
ENTER
PLAY
LIST
INDEX/SKIP
OUTPUT
TRACKING/V-LOCK
AV
DIRECT
NAVIGATOR
CANCEL/RESET ANGLE/PAGE
INPUT SELECT
MUSIC w/ PICTURE
PICTURE SPEED
AUDIO
POSITION MEMORY
SETUP ZOOM REPEAT PLAY MODE
A.SRD CINEMA
SUBTITLE
VHS/DVD
-/- -
ENTER
VHS/
TV/
DVD
SETUP
Digital output
PCM Down Conversion
Dolby Digital, DTS Digital Surround and MPEG ¢
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents issued and pending. “DTS” and “DTS Digital
Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital
Theater Systems, Inc. All rights reserved.
Audio
SELECT
PCM Down Conversion
Dolby Digital
DTS Digital Surround
MPEG
No
PCM
PCM
Dynamic Range Compression Off
Audio during Search On
Bitstream
SETUP
TAB
VP31GCGCS.book 36 ページ ２ ０ ０ ３ 年 ７ 月 ３ ０ 日 水曜日 午後 ８ 時 ２ ８ 分