Panasonic VP-31GN - Manual (Page 27)

27
Playing Discs-basic play
DV
D
Operations
Press the numeric buttons to select the desired item.
Example:
“03”; [3]
“10”; [
S10] l[1]l[0]
≥You can also use [3421] to select items. Press [ENTER] to confirm your selection.
¬ To revert to the menu screen
Press [MENU] (PLAY LIST).
¬ To show the top menu
Press [TOP MENU].
Notes:
≥Many Video CDs with playback control display a menu on the TV when played back. “PBC” is displayed
in the unit’s display.
≥The operation may differ depending on the disc. Read the disc’s instructions for further details about
operation.
≥Discs continue to rotate while menus are displayed.
Press [ ∫] when you have finished viewing to preserve the unit’s motor and your TV screen.
[DVD-V[ [RAM[ [VCD] [CD] [MP3] [WMA] (When the elapsed play time is displayed)
[JPEG]
Memorize positions on up to 5 different discs to restart play after turning off or changing discs.
..........................................................................................................................................................................................................................................................................................................................................
[1] During play, press [POSITION MEMORY].
≥Press again to replace the position.
..........................................................................................................................................................................................................................................................................................................................................
[2] Turn off the unit or remove the disc.
..........................................................................................................................................................................................................................................................................................................................................
[3]
Turn on the unit or set a disc for which the position is memorized and
Press [ 1](PLAY).
≥Play starts from the memorized position and the position is cleared.
≥When playing DVD-Video, see Chapter Review (
lbelow).
Notes:
≥If you set up 6 positions or more, the oldest position memory is replaced.
≥This function may not work while playing some DVDs or play lists on DVD-RAM.
[DVD-V]
When the Resume function is active, you can review the first few seconds of each chapter previously
played.
..........................................................................................................................................................................................................................................................................................................................................
When “ ” in the unit’s display flashes, the message appears by pressing [ 1](PLAY) once.
Press [ 1](PLAY) again.
≥After reviewing the chapters up to the one where you memorized the position, play resumes from that
position.
¬ To clear the position
Press [
∫].
Notes:
≥If you do not press [ 1](PLAY), the message disappears and play starts from where you press
[ ∫] or [POSITION MEMORY].
≥The position is also cleared when you turn the unit off, select another source or open the disc tray.
≥This is operative only in the current title.
When a menu screen appears on the TV [DVD-V] [VCD]
Position Memory function
Position memorized
Flashes as you memorize a position.
Chapter Review
Press PLAY to Preview Chapters
Press PLAY to Chapter Review
One of these messages appears.
VP31GCGCS.book 27 ページ ２ ０ ０ ３ 年 ７ 月 ３ ０ 日 水曜日 午後 ８ 時 ２ ８ 分