Connections, Basic connections, Audio/video output sockets – Panasonic VP-31GN User Manual

Page 8: For better video from dvd, Component video terminal (progressive out), S video terminal

Advertising
background image

8

Connections

When the unit is turned on after connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically.

Basic Connections

The following connections are required to record the video
cassette and play back the video cassette/discs through the
TV.

≥Refer to the TV’s operating instructions.
≥Turn the TV off and disconnect its AC mains lead.

ª For NV-VP31GC
2 AC mains leads are supplied for this unit. Use one of the
supplied AC mains leads of which the plug fits into your outlet.

R-AUDIO-L

VIDEO

OPTICAL

RF

AC IN

~

D I G I TA L AU D I O

(PCM/BITSTREAM)

R-AUDIO-L

VIDEO

S VIDEO

IN

OUT

COMPONENT VIDEO

(NTSC 480P/480I PAL 576I)

Y

P

B

P

R

R-AUDIO-L

VIDEO

VHS/DVD

OUT

DVD OUT

AV1 IN

TV Set (Not supplied)

Aerial
(Not supplied)

Aerial Connector

To mains supply

R-AUDIO-L

VIDEO

OPTICAL

AC IN

~

D I G I TA L AU D I O

(PCM/BITSTREAM)

R-AUDIO-L

VIDEO

S VIDEO

COMPONENT VIDEO

(NTSC 480P/480I PAL 576I)

Y

P

B

P

R

R-AUDIO-L

VIDEO

VHS/DVD

OUT

DVD OUT

AV1 IN

R-AUDIO-L

VIDEO

S VIDEO

(

)

AUDIO

IN

L

R

VIDEO

IN

COMPONENT

VIDEO IN

Y

P

B

P

R

AUDIO IN

L

R

IN

S VIDEO

Television

Audio/Video Output Sockets

COMPONENT VIDEO terminal (progressive out)

These terminals can be used for either interlace or progressive
output and provide a clearer picture than the S VIDEO terminal.
Connection using these terminals outputs the colour difference
signals (P

B

/P

R

) and luminance signal (Y) separately in order to

achieve high fidelity in reproducing colours.
≥The description of the component video input terminals depends

on the TV or monitor (e.g. Y/P

B

/P

R

, Y/B-Y/R-Y, Y/C

B

/C

R

). Connect

to terminals of the same colour.

¬ To enjoy progressive video

lpage 13

Video cable

(Not supplied)

Television

For better video from DVD

These connections are for the DVD section only.

Carry out the Basic Connections described above to view video from
the VHS section.

≥When making this connection, ensure that you connect the audio cables

(not supplied) to the corresponding audio input terminals on the TV.

≥You may need to change the video-input mode on the TV to view video from

the VHS and DVD sections. Read your TV’s operating instructions for
details.

S video cable

(Not supplied)

S VIDEO terminal

The S VIDEO terminal achieves a more vivid
picture than the VIDEO OUT terminal by
separating the chrominance (C) and luminance
(Y) signals (Actual results depend on the TV).
≥Connect to a different terminal group (e.g.,

“VIDEO 2”) than that you used for the
connection through this unit’s VHS/DVD OUT
terminal. Picture from the VHS section will not
appear when you use the same group input
terminal connections because the S video
terminal input takes precedence.

Television

≥Set the RF output channel of the unit to “ss” (RF OFF)

(

lpage 11).

Connect audio/video cables directly to your TV. The video

signals on DVDs and video tapes have copyright
protection. The video may not be shown correctly if you
connect through an A/V selector or other equipment.

Audio/video cable
(Supplied)

Television

Audio cable

(Not supplied)

VP31GCGCS.book 8 ページ 2 0 0 3 年 7 月 3 0 日   水曜日   午後 8 時 2 8 分

Advertising