Pioneer VSX-819H - Manual (Page 41)

The System Setup menu 06
41
En
English
Français
Deutsch
Nederlands
Italiano
Español
Chapter 6:
The System Setup menu
Using the System Setup menu
The following section shows you how to make
detailed settings to specify how you’re using
the receiver, and also explains how to fine-tune
individual speaker system settings to your
liking.
1 Switch on the receiver and your TV.
Use the  RECEIVER button to switch on. 1
2 Press RECEIVER on the remote control,
then press the SETUP button.
2
An on-screen display (OSD) appears on your
TV. Use
/// and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
3 Select the setting you want to adjust.
• Auto MCACC – This is a quick and
effective automatic surround setup (see
Automatically setting up for surround
sound (MCACC) on page 9).
• Manual SP Setup – Specify the size,
number, distance and overall balance of
the speakers you’ve connected (see
Manual speaker setup on page 41).
• Input Assign – Specify what you’ve
connected to the component video inputs
(see The Input Assign menu on page 44).
Manual speaker setup
This receiver allows you to make detailed
settings to optimize the surround sound
performance. You only need to make these
settings once (unless you change the
placement of your current speaker system or
add new speakers).
These settings are designed to fine-tune your
system, but if you’re satisfied with the settings
made in Automatically setting up for surround
sound (MCACC) on page 9, it isn’t necessary to
make all of these settings.
Caution
• The test tones used in the System Setup
are output at high volume.
Note
1 If headphones are connected to the receiver, disconnect them.
2 • You can’t use the System Setup menu when the iPod/USB input is selected.
• Press SETUP at any time to exit the System Setup menu.
• The OSD will not appear if you have connected using the HDMI output to your TV. Use component or composite connections
for system setup.
BD TV
INPUT SELECT SOURCE
DVR
INPUT
TV CONTROL
RECEIVER
ZONE 2
ON/OFF ENTER
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
iPod CTRL
CATEGORY
BAND
MENU
HOME
MENU
SETUP
TOP
MENU
TUNE
TUNE
P R E S E T P R E S E T
RETURN
RECEIVER
ENTER
SETUP
RECEIVER
System Setup
1.Auto MCACC
2.Manual SP Setup
3.Input Assign
Return
VSX-819H_KU.book Page 41 Thursday, December 25, 2008 8:36 AM