Other connections 11, Connecting your usb device to the receiver, Basic playback controls – Pioneer VSX-819H User Manual

Page 61

Advertising
background image

Other connections

11

61

En

English

Français

Deutsch

Nederlands

Italiano

Español

• Push down on the PUSH OPEN tab to

access the USB terminal.

Connecting your USB device to the
receiver

1

Switch on the receiver and your TV.

2

Press iPod USB on the remote control to

switch the receiver to the iPod USB.
NO DEVICE
appears in the OSD.

3

Connect your USB device.

1

The USB terminal is located on the front panel.

Loading appears in the OSD as this receiver
starts recognizing the USB device connected.
After the recognition, a playback screen appears
in the OSD and playback starts automatically.

2

Basic playback controls

The following table shows the basic controls
on the remote for USB playback. Press iPod
USB
to switch the remote control to the iPod
USB operation mode.

Important

If a USB Error message lights in the display,
try following the points below:

• Switch the receiver off, then on again.
• Reconnect the USB device with the

receiver switched off.

• Select another input source (like BD), then

switch back to iPod USB.

• Use a dedicated AC adapter (supplied with

the device) for USB power.

For more information on error messages, see
USB messages on page 68.

If this doesn’t remedy the problem, it is likely
your USB device is incompatible.

Note

1 Make sure the receiver is in standby when disconnecting the USB device.
2 • If the file selected cannot be played back, this receiver automatically skips to the next file playable.

• When the file currently being played back has no title assigned to it, the file name is displayed in the OSD instead; when

neither the album name nor the artist name is present, the row is displayed as a blank space.

• Note that non-roman characters in the playlist are displayed as *.
• It is not possible to output the USB audio to ZONE 2.

MASTER
VOLUME

SPEAKERS

CONTROL

MULTI-ZONE

ON/OFF

MCACC

SETUP MIC

VIDEO INPUT

R

L

AUDIO

VIDEO

iPod

USB

This receiver

USB mass
storage device

VIDEO INPUT

R

L

AUDIO

VIDEO

iPod

USB

U S B

R : F l d S : O n

0 0 1 / 0 0 4

P L AY

R e t u r n


R e l a x Yo u r B o d y

K e v i n J a c k s o n

W e a r e a l l o n e



3 2 k b p s 0 : 0 1

M P 3

File/Folder number

File format

Repeat or Shuffle
Song name
Artist name
Album name

Elapsed time

Bit rates

Button

What it does

Starts normal playback.

Pauses/unpauses playback.

/

Press to skip to previous/next track.

/

Press and hold during playback to
start scanning.

Press repeatedly to switch between
Repeat Folder, Repeat One and
Repeat All.

Press repeatedly to switch between
Shuffle On and Shuffle Off.

DISPLAY

Press repeatedly to change the song
playback information displayed in the
front panel display.

/
/

During playback, press to skip to
previous/next track.

TOP MENU Press to return to the menu screen.

RETURN

Press to return to the previous level.

VSX-819H_KU.book Page 61 Thursday, December 25, 2008 8:36 AM

Advertising