Panasonic KX-TD1232CE - Manual (Page 49)

49
PS Programming
PS Programming Operations
PS Programming (– except for Setting the PS Programming Password)
Note: – A PS Programming password or DECT System Lock password
may be required after step 4.
Press (Function).
Press (Book) 2 times.
• You can also search by pressing
(Next) or (Previous).
Press (OK).
Press (OK).
Press (Next) or (Previous)
repeatedly until the desired program
item is displayed.
Press (Book) repeatedly until the
desired selection is displayed.
• This step is not necessary for clearing
settings in memory.
Press (OK).
Repeat steps 5 through 7 if you want to
program other items.
To exit the PS Programming mode,
press
(Cancel).
C
OK
OK
OK
BACKLIGHT
= ON
1
2
3
Make sure the Power Switch is set to ON ( ●).
RING PATTERN
= 1
4
5
6
7
8
9
Example
RING PATTERN
= 6
Example
KEY
PROGRAMMING
PS-PROGRAM
RING PATTERN
= 6