Panasonic KX-TD1232CE - Manual (Page 55)

55
Before Requesting Help
P ROBLEM R EMEDY OR S OURCE OF T ROUBLE
You charged the batteries fully,
but “
” flashes.
The PS stops working during operation.
Handover does not work.
The display does not show a strong
radio signal “ ” even though you are
near the CS.
The alarm sounds during a conversa-
tion while receiving a weak radio sig-
nal “ ”.
• Clean the charge contacts and charge again.
• It is time to change the batteries. Please purchase
new batteries.
• Turn the power switch OFF (❍) and ON (●). Then
try again.
• Re-insert the battery and try again.
• You moved to a busy CS or are out of range.
• You moved while not having a conversation (e.g.,
while hearing a busy tone).
• The radio channel is busy or radio communication
error occurs.
• The PS user can make a call normally even in the
“ ” status. In this case, the current linked CS is
still connected even though the other CS is closer.
• The radio signal is weak. Move closer to the CS.