Installing the batteries, Installing a battery, Replacing a battery – Panasonic KX-TD1232CE User Manual

Page 8

Advertising
background image

8

Installing the Batteries

You need to charge the battery before initial use and when the bat-
tery strength becomes low.
When the battery strength becomes low, “

” flashes or beep

tones sound every five seconds. During a conversation, the call
will hang up automatically within three minutes. If idle or in the
programming status, “

BATTERY EMPTY

” is displayed and the key

operation is canceled. In these cases, recharge the battery or
replace with a fully charged optional spare battery.

Standard Battery Life
If your Panasonic battery is fully charged [provided 25°C (77°F)]:

Note:

– The battery is used while the portable station’s power is ON.
– Battery life may vary depending on usage conditions and ambient tem-

perature.

– Please use only a Panasonic battery.

Installing a Battery

Hook the bottom of the battery on the
portable station, and place the battery in the
portable station until you hear a click.

Replacing a Battery

Set the Power switch to OFF to prevent
memory loss.

While pressing the open-button, remove the
battery.

While in use (Talk mode)

While not in use (Stand-by mode)

Up to about 10 hours

Up to about 100 hours

1

1

2

INT'

F1

F2

F3

CLR

C

OFF

Advertising
This manual is related to the following products: