Panasonic AW-E560 - Manual (Page 34)

-32-
4. The camera is now in scene file set mode and as
shown on the right figure on the top appear on the
monitor screen.
5. One of the scene files appears blinking and changes
each time the item switch is pressed.
6. Press the page switch to select the desired scene file
number while it is blinking.
7. Now the mode setting is completed and the new
mode will be indicated on the screen for 2 seconds
before the camera returns to normal shooting mode.
* When the camera is controlled with the RCU (RCB) a
scene file is selected by the scene switch on the RCU
(RCB) and those figure will not be displayed.
CURR:MODE1/SCENE1
CURR:MODE1/SCENE1
SCENE1
SCENE2
SCENE3
USER A
USER B