Panasonic AW-E560 - Manual (Page 35)

-33-
MENU ITEM SETTING
Setup Item Setting
■ Setup Memory
The AW-E560 has a setup menu memory, which stores
data on the states of the individual functions of the camera
preset before shipment from the factory.
Camera operating conditions can be set using the setup
function.
The camera has a memory for each mode.
■ Setup State
Camera alone: Press the page switch for 2 seconds or
more.
Camera with RCU (RCB): Set the user set switch to ON.
When the camera has been placed in the setup state, the
SETUP menu is displayed on the monitor.
Setup operations can be performed at the camera head or
RCU (RCB).
* Composite signals are output from the VIDEO output
terminal regardless of the position (ENC/VF) of the
user set switch on the RCU (RCB).
■ Setup Data Screen
<Camera Alone>
<Camera with RCU (RCB)>
* When the camera is used with an RCU (RCB), those
items enclosed in parentheses can be adjusted with
the switches and controls on the RCU (RCB).
The word END is displayed only when the camera is
used alone.
** SETUP **
GAIN AGC HIGH
IRIS AUTO
SHUTTER OFF
WHITE BAL ATW
DTL LEVEL LOW
SCENE FILE USER A
INIT USER END
** SETUP **
GAIN ( AGC LOW )
IRIS ( AUTO )
SHUTTER ( OFF )
WHITE BAL ( ATW )
DTL LEVEL ( LOW )
SCENE FILE ( USER A )
INIT USER
1
2
3
4
5
6