Panasonic AW-E560 - Manual (Page 38)

** SETUP **
GAIN AGC HIGH
IRIS AUTO
SHUTTER OFF
WHITE BAL ATW
DTL LEVEL LOW
SCENE FILE USER A
INIT USER END
-36-
■ How to Read Screens ■ How to Set
(1) The cursor (blinking) moves each time the item switch
is pressed. The item indicated by the cursor can be
reset or its command can be executed.
(2) Use the Up and Down switches to change settings.
(3) When the page switch is pressed after moving the
cursor to INIT, the INITIAL SET menu will displayed.
(4) When the page switch is pressed after moving the
cursor to USER, the camera is ready for user setting.
(5) To terminate camera setup, move the cursor to END,
and press the page switch.
If the camera is used with an RCU (RCB), set the user
set switch to OFF.
The camera will then operate according to the set-
tings.
INITIAL SET MENU SETTING
■ Initial Set Memory
The AW-E560 has an initial set memory, which stores data
on the states of the individual functions of the camera pre-
set before shipment from the factory.
Camera operating conditions can be set using the initial
set function.
The camera has a memory for each mode.
Cursor (blinking)
Set parameter
To enter initial set state
To enter user set state
To return to normal state (camera alone)