Princeton Digital (USA) Guitar Effects Console G9.2tt2q - Manual (Page 12)

Using the Internal Tuner (Bypass/Mute Condition)
ZOOM G9.2tt 22
The > < symbols in the lower part of the display
show by how much the pitch differs from the
displayed note.
3. Tune the string of your instrument
while checking the note and pitch
indication.
HINT
First you should perform rough tuning to bring up
the desired note indication, and then watch the
lower part of the display and fine tune the pitch.
4. To change the reference pitch of the
tuner, turn parameter knob 3.
After the G9.2tt is turned on, the tuner reference
pitch is always "440 Hz (center A = 440 Hz). The
adjustment range using parameter knob 3 is center
A = 435 – 445 Hz, in 1-Hz steps.
HINT
When the G9.2tt is turned off and on again, the
reference pitch will be reset to 440 Hz.
5. When tuning is completed, press one
of the BANK [
W]/[Q] foot switches.
The G9.2tt returns to the previous mode. If the
G9.2tt was in edit mode, it will be switched to
play mode.
HINT
The bypass/mute condition can be canceled by
pressing the [BYPASS/TUNER] key, [EXIT] key, or
one of the foot switches 1 – 5.
Using other tuner types
Besides chromatic tuning, the G9.2tt offers
various other tuning types such as standard tuning
for guitar and bass, open tuning, etc. To use these
functions, proceed as follows.
1. Switch the G9.2tt to the bypass or
mute condition as described in step 1
Note
Note
[GROUP/BANK]
indicator Note
[GROUP/BANK]
indicator
E
AbB
A
BB
B
C
DB
D
EB
E
F
GB
G
Pitch is
low
Pitch is
correct
Pitch is
high
> >˙<
™CHROMATC CHROMATC £440Hz 440Hz
> > ˙
> > ˙
> > ˙
> >˙
> >˙<
˙<
˙ < <
˙ < <
˙ < <
> >˙<
™CHROMATC CHROMATC £442Hz 442Hz
Using the Internal Tuner (Bypass/Mute Condition)
ZOOM G9.2tt 23
STR1
STR2
STR3
STR4
STR5
STR6
STR7
GUITAR BASS OPEN A OPEN G OPEN E OPEN D DADGAD
G
D
A
E
B
E
B
G
D
A
E
B
E
DB
A
E
A
E
D
A
GB
D
A
D
E
B
AB
E
B
E
D
B
G
D
G
D
D
A
G
D
A
D
Tuner type
String
number
of "Using the chromatic tuner".
The display shows the tuning indication.
2. Turn parameter knob 2 to select the
tuner type.
The available tuner types and the corresponding
note names for each string are listed below.
If you select "OPEN A" as tuner type, the
[GROUP/BANK] indicator and display indication
will be as follows.
3. If necessary, turn parameter knob 3
to change the reference pitch of the
tuner.
The setting range is center A = 435 - 445 Hz, in
1-Hz steps.
When a setting other than chromatic has been
selected as tuner type, turning parameter knob 3
further anticlockwise from the "435" setting
selects the setting "b" (one semitone lower), "bb"
( t w o s e m i t o n e s l o w e r ) , a n d " b b b " ( t h r e e
semitones lower).
HINT
When the G9.2tt is turned off and on again, the
reference pitch will be reset to 440 Hz.
4. Play the open string of the indicated
number and adjust the pitch.
5. Turn parameter knob 4 to switch to
other strings.
6. Tune other strings in the same way.
7. When tuning is completed, press one
of the BANK [
W]/[Q] foot switches.
The G9.2tt returns to the previous mode. If the
G9.2tt was in edit mode, it will be switched to
play mode.
HINT
When the G9.2tt is turned off and on again, the
tuner type setting will be reset to the default
(chromatic tuner).
Tuner type Reference pitch
String number Correct note for selected string
> >˙< < ¢Str2 Str2
™OPEN A OPEN A £440Hz 440Hz
DB
Optional tuning to 1 - 3 semitones lower
> >˙< < ¢Str1 Str1
™GUITAR GUITAR £