Pioneer PureVision PDP 42A3HD - Manual (Page 18)

06 Basic Operations
18
En
Turning the power on and off (Standby)
1 Press the POWER button on the bottom of the Plasma
Display to enter the standby mode.
• The STANDBY indicator lights up.
2 Press the TV button on the remote control or the
STANDBY/ ON button on the bottom of the Plasma
Display.
• The Plasma Display switches to on. The STANDBY
indicator lights off and the current input source
indicator lights up.
3 To switch the Plasma Display off, press the TV button
on the remote control or the STANDBY/ ON button on
the bottom of the Plasma Display for 1 second.
• The Plasma Display enters to standby mode and the
STANDBY indicator lights up instead of the current
input source indicator.
4 To switch the Plasma Display off completely, press the
POWER button on the bottom of the Plasma Display.
• The STANDBY indicator lights off.
• If you are not going you use the Plasma Display for a long period of
time, press POWER button on the bottom of the Plasma Display
to switch the Plasma Display off completely and disconnect the
power cord of the Plasma Display from a wall outlet.
• If the Plasma Display is switched off completely, you cannot turn the
Plasma Display on by pressing the TV button on the remote
control.
• If the Plasma Display is switched off completely, it cannot switch the
Plasma Display on automatically by the “On Timer“ setting.
06 Basic Operations
POWER
DTV TV VCR DVD HDMI S TA N D B Y
STANDBY
/ON
DTV TV VCR DVD HDMI S TA N D B Y
POWER
button
STANDBY indicator
STANDBY/ON button
Current input source indicator
07-PDP42A3HD-Eng (18-22) 5/17/05, 7:28 PM 18