Paradyne 8784 User Manual
Page 108
Index
IN-4
February 2001
8784-A2-GB20-30
P
Passed, self-test result, 4-5
pattern test, 5-7
Peer IP Address, A-3
performance statistics
Current Network Performance, 4-10
DSX-1 Performance Statistics, 4-11
Error Statistics, 4-6
Network Performance Statistics, 4-8
physical environment requirements, D-1
pin assignments, C-1
Port Status, A-5
power requirements, D-1
Primary Clock Source, A-6
R
Rate
Auto, A-3
DSL Line, A-3
excessive errors threshold, A-5
related documents, vi
Remote
management features, 1-2
Send Line Loopback, 5-6
Telco Line Loopback, enabling/disabling, A-9
Repeater Loopback (RLB), 5-4
Resetting, 3-11
resetting
the AutoRate feature, 3-11
the unit from the Control menu, 3-12
restoring access to the ATI, 3-4, 3-11
S
safety certifications, D-1
saving configuration options, 3-7
screen area, 2-5
security, 7-1
AIS on Network Failure, A-6
All Ones on DSX-1 Failure, A-6
and Monitor 511, 5-7
Remote Line Loopback, 5-6
Session Access Level, Telnet, A-11
size of card, D-1
SNMP
Community Name Access, A-13
General Management Options, A-12
Management
enabling/disabling, A-13
general, 1-4
limiting access, 7-4
NMS
Security, 7-4
Security Options, A-14–A-15
standards compliance for traps, B-1
system entries, 3-2
Traps, B-1
configuring, 6-2
enabling/disabling, A-17
Options, A-16
support, 1-4
specifications, D-1
standards compliance for SNMP traps, B-1
starting an ATI session, 2-2
start-up, 2-1
status
Port, DSX-1, A-5
test messages, 4-5
Status menu
Display LEDs, 4-13
Performance Statistics
Current Network, 4-10
DSX-1, 4-11
Network, 4-8
Network Error, 4-6
System and Test
Self-Test Results, 4-5
Status, 4-2
Test Status, 4-5
System
device name field, 3-2
Identity information, 3-2
LEDs, 4-14
Options, A-8
System Options