Panasonic C9700U - Manual (Page 17)

44
CQ-C9800/9700U CQ-C9800/9700U
45
Audio Settings
(continued)
Note:
≥ Press [DISP] (display) to return to the
regular mode.
≥ If no operation takes place for more than
5 seconds in audio setting (2 seconds in
the volume setting), the display returns to
the regular mode.
≥ When SBC-SW setting (page 23) has
been selected to ON, the settings resulting
from the adjustments performed at the
subwoofer level and subwoofer low pass
fi lter settings are refl ected in the output.
Subwoofer Level
You can change the subwoofer volume level.
Default: 0 dB
Setting range:
j¶ (subwoofer mute),
j6 dB to i6 dB (by 2 dB)
Subwoofer Low Pass Filter
(LPF)
You can select the upper limit frequency of the
sound from subwoofer.
Default: 120 Hz
Setting range: OFF, 60 Hz
j160 Hz (by 5 Hz)
[VOLUME "]: Increased
[VOLUME #]: Decreased
[VOLUME "]: Increased
[VOLUME #]: Decreased
High Pass Filter (HPF)
Select the lower limit frequency of the sound
from speakers (except subwoofer).
Default: OFF
Setting range: OFF, 90 Hz
j225 Hz (by 5 Hz)
[VOLUME "]: Increased
[VOLUME #]: Decreased
(Push.)
Push
Push
Push
6 4
9 7
5
Car Audio
SOURCE
MUTE
POWER
RAND
VOL
3 1 2
DISP BAND
REP
6 5
SET
SEL
#
SCAN
MENU
NUMBER
8
0 [DISP]
(Display)
[SEL]
(Select)
[VOL "]
[VOL #]
E
N
G
L
I
S
H
25
E
N
G
L
I
S
H
26
2
Turn [VOLUME].
Press [VOL "] or [VOL #].
[VOLUME "]
[VOLUME #]
1
Press [VOLUME]
(PUSH SEL: select).
Press [SEL].
(page 42)