Panasonic C9700U - Manual (Page 25)

60
CQ-C9800/9700U CQ-C9800/9700U
61
Troubleshooting
(continued)
E
N
G
L
I
S
H
41
E
N
G
L
I
S
H
42
CD Changer Control
Note:
≥ Messages in the action and display sections of the error chart vary with changers.
Refer to the operating instructions of the CD changer for details.
Disc is dirty, or is upside down. Check the disc.
(The changer automatically switches
to the next disc.)
A disc other than a music CD
(CD-DA type) is loaded.
Display Possible cause Possible solution
Disc has scratches. Check the disc.
(The changer automatically switches
to the next disc.)
No operation by some cause. If normal operation is not restored,
call the store where you purchased
the unit or the nearest Panasonic
Servicenter to ask for repairs.
The display continues if you cannot
switch off the power.
No disc is in the changer
(magazine). Insert discs into the changer
(magazine).
The dual CD changer selector is
connected but the changers are not
connected. Verify that correct connections have
been made.
The changer has become
disconnected from this unit in the
changer mode.
Maintenance
Your product is designed and manufactured to
ensure a minimum of maintenance. Use a dry and
soft cloth for routine exterior cleaning. Never use
benzine, thinner or other solvents.
Product Servicing
If the suggestions in the charts do not solve the
problem, we recommend that you take it to your
nearest authorized Panasonic Servicenter. The
product should be serviced only by a qualifi ed
technician.
Fuse
Use fuses of the same specifi ed rating (15 A). Using
different substitutes or fuses with higher ratings,
or connecting the unit directly without a fuse, could
cause fi re or damage to the unit.
If the replacement fuse fails, contact your nearest
Panasonic Servicenter for service.
Customize Function
No customize-specifi c data on the
disc. Load a disc that contains
customize-specifi c data.
Display Possible cause Possible solution
Customize failed. Check to see whether or not the
extension is correct and fi le contents
are appropriate.
Intended moving image or still
image is damaged. Customize it again and overwrite the
fi le with new one.
NO FILES DETECTED
CUSTOMIZING
FAILED
DISPLAY FILE
INCOMPLETE