Panasonic C9700U - Manual (Page 9)

28
CQ-C9800/9700U CQ-C9800/9700U
29
Disc Insert
1 Press [ <: eject] (OPEN).
If there is a disc loaded,
the disc will be ejected.
2 Insert a disc.
Note:
≥ It may take some time to start playing.
≥ Playback will start automatically after recognizing
the data of the loading disc.
Before Disc Playback
Track Selection
[ 9]: Next track
[ :]: Beginning of the current track
For the previous track, press twice.
Fast Forward/Fast Reverse
Press and hold
[
9] (5): Fast forward
[ :] (6): Fast reverse
Release to resume the playback.
Pause
Press [ ;/1].
Press [ ;/1] again to cancel.
Scan Play
The fi rst 10 seconds of each track is played in
sequence.
Press [5] (SCAN).
lights.
Press [5] (SCAN) again to cancel.
Direct Track Selection
Example: track number 10
1 Press [ fl].
2 Press [1] [0].
3 Press [BAND] (SET).
Note:
≥ To suspend direct selection, press [DISP]
(display) or [ fl].
≥ Random, scan and repeat play are canceled once
[ fl] is pressed.
Text Display
Press and hold [DISP] (display) for more than
2 seconds in the mode display.
Note:
≥ The power will be turned on automatically when
a disc is loaded.
≥ A disc which has both CD-DA data and
MP3/WMA data on it may not be reproduced
normally. (For example, it may be reproduced
without sound.)
≥ Refer to the section on “Notes on MP3/WMA”
(page 36) and “Notes on Discs” (page 62).
E
N
G
L
I
S
H
9
E
N
G
L
I
S
H
10
CD Player
Do not watch the scroll display while driving.
[ <: eject] (OPEN)
[ :]/[9] (6/5)
(Track selection/fast forward/fast reverse)
[SOURCE]
[BAND]
(
;/1: Pause)
(SET)
[0] to [9]
(Track number)
[5] (Scan play)
[
6] [5]
(Track selection/fast
forward/fast reverse) 6 4
9 7
5
Car Audio
SOURCE
MUTE
POWER
RAND
VOL
3 1 2
DISP BAND
REP
6 5
SET
SEL
#
SCAN
MENU
NUMBER
8
0 [DISP]
(Display)
[SOURCE]
[BAND]
(Pause) (SET)
[ fl]
(Number)
Available Discs
∫ CD-DA
∫ MP3/WMA
Caution:
≥ 3q (8 cm) CD is not available for this unit, so
do not insert it.
≥ Do not use irregularly shaped discs.
≥ Do not use discs that have a seal or label
attached.
≥ To avoid damaging the front panel, do not push
it down or place objects on it while it is open.
≥ Keep your fi ngers and hands away from the
front panel when the panel is in motion.
≥ Do not insert foreign objects into the disc slot.
Label side
When CD is in the Player
Press [SOURCE] to select the CD (MP3/WMA)
player mode and playback starts.
Disc Eject
1 Press [ <: eject].
The disc will be ejected after the front panel fully
opens.
2 Take a disc.
3 Press [ <: eject] again to close.
Note:
≥ If no operation takes place within 20 seconds or
so after the panel has opened, the panel will close
automatically.
(Example: CD-DA)
* Press and hold [BAND] for more than 2 seconds
to have an another circle scroll when a title is
displayed.
Note:
≥ “NO TEXT”: Displays when there is no text.
*Disc/track title (default)
Mode display
[DISP]
(Display)
When placing a disc into or taking a disc out from
the main unit, hold it as shown in the fi gure, and
refrain from putting any of your fi ngers into the
disc’s center hole.
This instructions on this page are followed for both
CD-DA playback and MP3/WMA playback.
Disc indicator
lights when the disc is loaded.