Planet Technology ADW-4300A - Manual (Page 15)

Setup
9
Configuration Program
The ADSL Wireless Firewall Router contains an HTTP server. This enables you to
connect to it, and configure it, using your Web Browser. Your Browser must support
JavaScript.
The configuration program has been tested on the following browsers:
•
Netscape V4.08 or later
•
Netscape 7
•
Internet Explorer V5.01 or later
Preparation
Before attempting to configure the ADSL Wireless Firewall Router, please ensure that:
•
Your PC can establish a physical connection to the ADSL Wireless Firewall Router.
The PC and the ADSL Wireless Firewall Router must be directly connected (using
the Hub ports on the ADSL Wireless Firewall Router) or on the same LAN seg-
ment.
•
The ADSL Wireless Firewall Router must be installed and powered ON.
•
If the ADSL Wireless Firewall Router's default IP Address (192.168.0.1) is already
used by another device, the other device must be turned OFF until the ADSL Wire-
less Firewall Router is allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the ADSL Wireless Firewall Router:
1. After installing the ADSL Wireless Firewall Router in your LAN, start your PC. If
your PC is already running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the ADSL Wireless
Firewall Router, as in this example, which uses the ADSL Wireless Firewall
Router's default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter default user name admin
and leave the password field blank (no password).