Planet Technology ADW-4300A - Manual (Page 30)

ADSL Wireless Firewall Router User Guide
24
Figure 16: Windows NT4.0 - IP Address
3. Select the network card for your LAN.
4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or
Specify an IP Address, as explained below.
Obtain an IP address from a DHCP Server
This is the default Windows setting. Using this is recommended. By default, the
ADSL Wireless Firewall Router will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the ADSL Wireless Firewall
Router.
Specify an IP Address
If your PC is already configured, check with your network administrator before making
the following changes.
1. The Default Gateway must be set to the IP address of the ADSL Wireless Firewall
Router. To set this:
•
Click the Advanced button on the screen above.
•
On the following screen, click the Add button in the Gateways panel, and enter
the ADSL Wireless Firewall Router's IP address, as shown in Figure 17 below.
•
If necessary, use the Up button to make the ADSL Wireless Firewall Router
the first entry in the Gateways list.