Connecting to the virtual servers – Planet Technology ADW-4300A User Manual

Page 60

Advertising
background image

ADSL Wireless Firewall Router User Guide

54

Figure 38: Virtual Servers Screen

Data - Virtual Servers Screen

Servers

Servers

This lists a number of common Server types. If the desired
Server type is not listed, you can create a Firewall Rule to
achieve the same effect as the Virtual Server function.

Properties

Enable

Use this to Enable or Disable support for this Server, as
required.

If Enabled, you must select the PC to which this traffic will be
sent.

PC (Server)

Select the PC for this Server. The PC must be running the
appropriate Server software.

For each entry, the PC must be running the appropri-
ate Server software.

If the desired Server type is not listed, you can define
your own Servers, using the Firewall Rules.

Connecting to the Virtual Servers

Once configured, anyone on the Internet can connect to your Virtual Servers. They
must use the Internet IP Address (the IP Address allocated to you by your ISP).
e.g.

http://203.70.212.52

ftp://203.70.212.52

It is more convenient if you are using a Fixed IP Address from your ISP, rather than
Dynamic. However, you can use the Dynamic DNS feature to allow users to connect
to your Virtual Servers using a URL, rather than an IP Address.

From the Internet, ALL Virtual Servers have
the IP Address allocated by your ISP

Advertising
This manual is related to the following products: