Planet Technology ADW-4300A - Manual (Page 10)

ADSL Wireless Firewall Router User Guide
4
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
PWR LED On - Power on.
Off - No power.
STATUS
LED Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware
Upgrade.
LAN For each port, there are 2 LEDs, to indicate the connection speed
(10Base-T or 100Base-T) of each port.
•
100 LNK/ACT - This will be ON if the LAN connection is using
100BaseT, and Blinking if data is being transferred via the cor-
responding LAN port.
•
10 LNK/ACT - This will be ON if the LAN connection is using
10BaseT, and Blinking if data is being transferred via the corre-
sponding LAN port.
•
If neither LED is on, there is no active connection on the corre-
sponding LAN port.
WLAN LED On
– Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless
access point. This includes "network traffic" as well as user data.
ADSL On - ADSL connection is available.
Off - No ADSL connection.
Flashing - Data is being transmitted or received via the ADSL
connection.