Planet Technology ADW-4300A - Manual (Page 21)

Setup
15
Wireless Screen
The ADSL Wireless Firewall Router's settings must match the other Wireless stations.
Note that the ADSL Wireless Firewall Router will automatically accept both 802.11b
and 802.11g connections, and no configuration is required for this feature.
To change the ADSL Wireless Firewall Router's default settings for the Wireless
Access Point feature, use the Wireless link on the main menu to reach the Wireless
screen. An example screen is shown below.
Figure 7: Wireless Screen
Data - Wireless Screen
Identification
Regulatory
Domain Select the correct domain for your location. It is your responsibil-
ity to ensure:
•
That the ADSL Wireless Firewall Router is only used in
domains for which is licensed.
•
That you select the correct domain, so that only the legal
channels for that domain can be selected.
Station name This is the same as the "Device Name" for the ADSL Wireless
Firewall Router.
SSID
(ESSID)
•
If using an ESS (Extended Service Set, with multiple access
points) this ID is called an ESSID (Extended Service Set
Identifier).
•
To communicate, all Wireless stations should use the same
SSID/ESSID.