Pioneer PDP-428XG - Manual (Page 25)

Setting up 08
25
En
Eng
lis
h
Chapter 8
Setting up
Setting up TV channels automatically
This section describes how to automatically search for and set up
TV channels.
Using Auto Installation
When the plasma television is switched on for the first time after
purchase, the initial auto installation is initiated. You can set
language, region and channels in successive operations.
1 Select “Language“ ( /).
2 Select a language ( /).
You can select from among five languages; English, Spanish,
Portuguese, traditional Chinese and simplified Chinese.
3 Select “Region“ ( /).
4 Select your region ( /).
Select the country or region in which you live. If it is not listed,
select “Other regions”.
5 Select “Channel Allocation“ ( /).
6 Select “General”, “Air (US Type)“ or “Cable (US Type)” ( /
).
The table on page 65 (Standard channel allocation selections for
countries and regions) shows which option you should usually
select in your country or region.
7 Select “Start“ ( / then ENTER).
Auto Installation automatically starts.
• To quit Auto Installation in progress, press RETURN.
Note
• You can start Auto Installation from the HOME MENU after
moving to another country, for example. Perform the following
steps before starting Auto Installation: Press
HOME MENU,
select “Setup” ( / then ENTER), then “Auto Installation” (/
 then ENTER). The password entry screen appears. Enter
your four-digit password using buttons
0 to 9. For the
password, see Using a password on page 40.
• If no channels are found, check the antenna connections, and
then retry Auto Installation.
Setting up TV channels manually
Use the Manual Adjust function to set up TV channels manually.
Steps 5 to 14 differ depending on your selection for Channel
Allocation.
1 Press HOME MENU.
2 Select “Setup“ ( / then ENTER).
3 Select “Analog TV Setup“ ( / then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons
0 to 9. For the password, see Using a password on
page 40.
4 Select “Manual Adjust“ ( / then ENTER).
5 Select “Program Entry“ ( /).
6 Select a program number ( /).
• With “General” selected, you can select 1 through 99.
• With “Air (US Type)” selected, you can select 2 through 69.
• With “Cable (US Type)” selected, you can select 1 through 125.
7 Select “Search“ ( /).
8 Enter a frequency using buttons 0 to 9, then ENTER.
You can also press
/ to enter a frequency.
• With “Air (US Type)” or “Cable (US Type)” selected, you cannot
change the display frequency.
9 Select “System“ ( /).
10 Select a sound system ( /).
You can select from among “B/G”, “D/K”, “I” and “M/N”.
• With “Air (US Type)” or “Cable (US Type)” selected, you cannot
change the factory default (“M/N”).
Item Description
General Scans to locate your regional broadcasting
frequencies. The earlier the frequencies identified, the
smaller the channel numbers used.
Air (US Type) Searches for the same broadcasting frequencies as for
receiving over air in the U.S. This selection is effective
when the system is receiving over air.
Cable (US Type) Searches for the same broadcasting frequencies as for
watching cable TV in the U.S. This selection is effective
when the system is receiving from a cable TV company.
Auto Installation
Channel Allocation
Installation
Language English
Start
General
Region Australia
Manual Adjust
Search
System
Program Entry
Color System
Store
Tuner NR
Child Lock
High Deviation
44.25MHz
B/G
Auto
View
On
Yes
1
Off