Pioneer VSX-709RDS - Manual (Page 45)

45
En
Operation
Naming Memorized Stations (front panel only)
You can input a name of up to four characters for each preset station in the receiver’s memory (see the previous
page). This name can be anything you choose. For example, you could input "BBC1" for that station and when
you listen to it the name, rather than the frequency number, will appear on your display.
1 Press FM/AM to set the tuner function.
2 Press CLASS repeatedly to select the class.
Repeatedly pressing this button cycles through the three available
classes, A, B and C.
3 Press STATION (+/–) to select the preset
channel.
4 Press CHARACTER/SEARCH to select the
character input mode.
5 Press STATION (+/–) to choose the first
character.
The STATION +/– buttons scroll through the letters, numbers and
symbols you can input. Refer to “Character display used station
name input” on page 44.
6 Press MEMORY to input the first of the four
characters.
That character appears in the display and the cursor automatically
moves to the next space.
After four characters have been entered, the character input mode
is exited.
Repeat steps 2 to 6 to memorize up to 30 preset broadcast
station names.
To erase or change the station name
Perform the procedures of “Naming Memorized Stations” and enter
four spaces to erase the memorized station name.
When you want to change a memorized station name, input the new
station name using the same procedure.
Using the Tuner
3,5 6 4
1
2