Panasonic KX-TG6645 - Manual (Page 35)

R The announcement is heard at the
same level as the ringer volume
(page 17, 28).
R If you turn on the answering system
and set the number of rings “2
rings” (page 43), the unit does not
announce the caller information. If
“Toll saver” is selected and there
is a new message, the unit does not
announce the caller information.
R When you receive a call while on the
phone, the 2nd caller’s name is not
announced even if you subscribe to
both Caller ID and Call Waiting with
Caller ID services.
*1 KX-TG6641 series: page 3
Phonebook name announcement
When caller information is received and
it matches a phone number stored in the
phonebook, the stored name in the
phonebook is announced.
Ringer ID
This feature can help you identify who is
calling by using different ringer tones for
different groups of callers. When adding
an entry to the phonebook, you can
assign it to the desired group (page 22).
When a call is received from a caller
assigned to a group, the ringer you
selected for that group rings after caller
information is displayed. If you select
“Current ringer” (default), the unit
uses the ringer tone you selected on
page 28 when calls from this group are
received.
1 M N a MMENUN
2
MbN: “Group” a MSELECTN
3
MbN: Select the desired group. a
MSELECTN
4
MbN: Select the current setting of the
ringer ID. a MSELECTN
5
MbN: Select the desired ringer tone.
a MSAVEN
6 MOFFN
Caller list
Important:
R Only 1 person can access the caller
list at a time.
R Make sure the unit’s date and time
setting is correct (page 14).
Viewing the caller list and
calling back
Handset / Base unit *1
*1 KX-TG6641 series: page 3
1
Proceed with the operation for your
unit.
Handset:MFN CID
Base unit: M
N CID
2
Press MCN to search from the most
recent call, or MDN to search from the
oldest call.
3
Proceed with the operation for your
unit.
Handset:
– To call back, press M
N.
– To exit, press MOFFN.
Base unit:
– To call back, press MSP-PHONEN.
– To exit, press MnN (EXIT).
Note:
R If the entry has already been viewed
or answered, “ ” is displayed, even if
it was viewed or answered using
another unit.
R In step 2, if is displayed, not all of
the information is shown. To see the
remaining information:
Handset:
Press MEN. To return to the previous
screen, press MFN.
For assistance, please visit http://www.panasonic.com/help 35
Caller ID Service