2 connecting the internal modem, 3 setting up dialing, Connecting the internal modem – Psion Teklogix Netbook Pro none User Manual

Page 131: Setting up dialing, Specifications, Connecting the modem

Advertising
background image

Psion Teklogix NETBOOK PRO User Manual

111

Chapter 7: Configuring Communications

Connecting To An ISP Or RAS

7.4.3.2

Connecting The Internal Modem

The NETBOOK PRO’s modem port provides the connection access to the internal
modem using the RJ-11 telephone cable.

Specifications

Data - V.92, 56Kbps (AT command).

Fax - 14.4 Kbps (Fax control command Class 1).

Connecting The Modem

The modem port is located under a rubberized cover, on the left side of the
NETBOOK PRO. To connect the internal modem cable, follow the steps below:

1. Open the modem cover on the left side of the NETBOOK PRO by

pulling away the rubberized cover.

2. Plug one end of the RJ-11 telephone cable into the modem connector.

3. Connect the other RJ-11 connector into an active (analog) phone jack.

(It may be necessary to use a country-specific modem adaptor).

Warning:

In case of a lightning storm, unplug the modem cable from the
telephone jack.

Do not connect the modem to a digital telephone line. A digital line
will damage the modem.

4. In the NETBOOK PRO programs, go to Start/Settings/Control

Panel/Built-In Modem Settings, then select the Country of Use.

7.4.3.3

Setting Up Dialing

When you connect to the Internet, your NETBOOK PRO will need to dial your
service provider’s telephone. You can set up different dialing ‘locations’ so that your
NETBOOK PRO knows how to dial the number correctly, e.g. if you're dialing from
the ‘office’ location, you might need to add a ‘9’ before the number you want to dial.

Advertising