Proxima ASA 7911 - Manual (Page 12)

6
Figure 2
Attachment of the RangeLAN2 Serial Adapter Antenna
2. Attach one end of an RS-232 cable to the RangeLAN2
Serial Adapter and the other end to a free serial port of a
communication device, such as a terminal or a com-
puter. Perform this step with both Serial Adapters.
3. Each RangeLAN2 791x Serial Adapter is preconfigured
to operate as a Station. Therefore, before two Serial
Adapters will communicate, one must be set as a Mas-
ter. Using the Station/Master rotary switch on the
underside of the RangeLAN2 Serial Adapter, set one
unit of each Serial Adapter pair as a Master and leave
the second unit as a Station.