Proxima ASA 7911 - Manual (Page 30)

24
There are also four LEDs on the back panel of the RangeLAN2
791x Serial Adapter:
❑ The green Master LED, located between the DC power
jack and the serial interface, is on steady when the unit
is set as a Master.
❑ The yellow Sync LED, located between the DC power
jack and the serial interface, is on steady when the unit
is set as a Station and is synchronized to a Master.
❑ The yellow Override LED, to the left of the serial
interface, is on steady when the Serial Adapter is using
a value for Station Type, Domain, or both which was
configured from within the software interface. When
this LED is on, the Serial Adapter is not using the
Station/Master and/or Domain value(s) set by the rotary
switches.
❑ The green LED, to the left of the serial interface, is
reserved for future use.