Panasonic MC-CG902 - Manual (Page 13)

- 13 - - 44 -
Overload Tools-
POWER Protector Headlight On-Board Cord Length
120V. AC (60Hz) Yes Yes Yes 24 Ft. (7.3 m)
12.0 A
Protector
contra Extensión
Voltaje subrecargas Luz Herramientas de cordón
120V. AC (60Hz) Si Si Si 7,3 m (24 pi)
12,0 A
Protecteur Dispositif Longueur
Alimentation de surcharge d’éclairage Accessoires du cordon
120 V c.a. (60 Hz) Oui Oui Oui 7,3 m (24 pi)
12,0 A
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
TO CHECK BRUSHES:
➢ ➢ When brushes are worn to the level
of the base support bar, replace the
brush dowel.
TO REPLACE AGITATOR
ASSEMBLY
➢ ➢ Remove agitator cover, belt and
agitator assembly. (See
“REMOVING BELT”).
➢ ➢ Replace agitator assembly.
➢ ➢ Replace belt, agitator cover and
screws. (See “REPLACING BELT”).
Base Support Bar
Barres de support de la base
Barra de soporte de la base
Worn Brushes
Brosses us es
Cepillos Desgastado
é
New Brushes
Nouvelles brosses
Cepillos Nuevos
Brush Servicing
WARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before performing maintenance to the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.