Parasound AVC-2500 - Manual (Page 26)

26
Auto Audio
When you press and hold this button down for three seconds, the AVC-2500 scans for a
source that is playing. It will search for any active digital or analog audio signal and
automatically switch to that source with the accompanying digital or analog audio input,
video, and ASP mode you had assigned to that Input Source. This advanced feature provides
virtual one-touch operation for audio playback.
Tune
୴ ୴ ୴ ୴ ୴
/ Auto Video
When the tuner is activated, pressing the Tune
୴ ୴ ୴ ୴ ୴ button normally selects the next station
preset. If you had pressed the Tuning button once before pressing the Tune
୴ ୴ ୴ ୴ ୴ button, each
time you press the Tune > button it will select the next broadcast frequency. If you pressed
the Tuning button twice before pressing the Tune
୴ ୴ ୴ ୴ ୴ button, each time you press the Tune ୴ ୴ ୴ ୴ ୴
button it will tune up 50 kHz.
Auto Video
When you press and hold this button down for three seconds, the AVC-2500 automatically
scans for any video source that is on. It will search for any active video signal and automatically
switch to that source with the accompanying digital or analog input, and ASP mode you had
assigned to that Input Source. This advanced feature provides virtual one-touch operation
for movie viewing.
Memory / Enter ୴ ୴ ୴ ୴ ୴
The Mem/Enter
୴ ୴ ୴ ୴ ୴ button is used to match together and memorize Digital Inputs, Surround
Modes, THX, and Dynamic Range Control settings with Sources. This button is also used
during the setup process.
Tuning
Pressing the Tuning button activates the AVC-2500 tuner. It also changes the tuning mode
from automatic to manual. In the auto mode, the Tune
୵ ୵ ୵ ୵ ୵ and ୴ ୴ ୴ ୴ ୴ buttons select the previous
or next broadcast frequency; in the manual mode, the Tune
୵ ୵ ୵ ୵ ୵ and ୴ ୴ ୴ ୴ ୴ buttons select frequencies
in - 50 kHz or + 50 kHz steps.
Status
The Status button activates the on-screen display to show the operational status of the
AVC-2500. Press this button again to turn off the status display.
FM/AM
The FM/AM button selects FM and AM frequency bands while the tuner is active. Unlike
the Tuning or Preset buttons, the FM/AM button does not activate the tuner.
A. Cal
Pressing the A. Cal button engages the Automatic Calibration feature of the AVC-2500 in
the setup menu when the ACM-2500 microphone is connected.
Dimmer
The Dim button dims the front panel display and indicators brightness by 50%.