Parasound AVC-2500 - Manual (Page 54)

54
To Trim Individual Channel Levels
1. Press the Setup/Trim button on the remote control until source SPEAKER LEVEL TRIM
,
SUBWOOFER
[
PRESET CAL LEVEL ] dB appears on the front panel or on-screen display.
2. Press the Volume
̅ ̅ ̅ ̅ ̅ or ̃ ̃ ̃ ̃ ̃ buttons to adjust the subwoofer to the desired level.
3. Press the Tune
୵ ୵ ୵ ୵ ୵ or ୴ ୴ ୴ ୴ ୴ buttons to select the next or previous channel for adjustment.
4. Repeat steps 2 and 3 to set levels for surround, center, and LFE channels.
5. Press the Setup/Trim button at any time during the Trim process to exit Trim and restore
the Volume
̅ ̅ ̅ ̅ ̅ or ̃ ̃ ̃ ̃ ̃ buttons to their normal function.
Activating the Sleep Timer
The Sleep button sets the AVC-2500 to automatically turn itself off. Each press of the Sleep
button adds 15 minutes to the sleep timer, up to a maximum of 90 minutes. During the last
two minutes of the sleep timer, the volume level gradually drops before the AVC-2500 turns
off.
To Activate the Sleep Timer
1. Press the Sleep button on the remote control until source SLEEP TIMER ON appears in the
on-screen display. A clock symbol appears in the front panel display.
2. Each press of the Sleep button adds 15 minutes to the sleep timer. When the sleep timer
is active, the front panel display automatically dims.
3. Press and hold the Sleep button to cancel the sleep timer.
Maintaining Your AVC-2500
Your AVC-2500 requires no periodic maintenance and has no user serviceable parts inside.
To avoid the risk of electric shock, do not remove the top cover. Clean the chassis with a soft
cloth moistened with glass cleaner or water. Never use solvents or abrasives
In Case of Trouble
Call your Parasound dealer or Parasound Technical Service Department. We can suggest
other diagnostic tests you can easily perform. If we determine that your amplifier should be
returned to Parasound or an Authorized Parasound Warranty Center for inspection and pos-
sible servicing, call Parasound for the location of a warranty center near you or shipping
instructions for return to Parasound.
Returning your AVC-2500 to Parasound for Service
If we determine that you should send your AVC-2500 to Parasound, you will need to obtain
a Return Authorization (RA) number. The RA number must be clearly marked on the outer
carton only. Ship the unit with adequate insurance and a copy of your purchase receipt
inside to validate your warranty. Warranty repairs will only be performed by Parasound or
authorized warranty centers on sets where your purchase receipt is from an Authorized
Parasound Dealer or Parasound Reseller. Units purchased from unauthorized dealers are
not eligible for warranty repair.
Units that arrive without an RA number, without a suitable shipping carton or with evidence
of improper internal packing materials may be refused. We do not accept collect shipments.
After repair under warranty, the unit will be returned to you via prepaid UPS within the
Continental United States. In the case of a non-warranty repair, contact us and we will
advise you of the repair charges before you ship the unit to us. The same packing and Return
Authorization number requirements apply.