Parasound AVC-2500 - Manual (Page 9)

9
Introduction
Congratulations on your purchase of this precision component and thank you for selecting
Parasound. Your new AVC-2500 Audio Video Controller is designed to be the heart of the finest
imaginable home theater system and to provide you with years of listening and viewing
enjoyment. Intuitive front panel and remote control operation makes your AVC-2500 one of the
easiest to use high performance audio/video products ever developed.
Autoformat Surround Processing (ASP) modes include Dolby Digital, DTS, Stereo, a dual-
stereo “party” mode, an enhanced music mode and mono. You can easily set up the AVC-2500
to detect the type of signal present at each input and automatically decode it based on how the
source software was originally encoded. Your AVC-2500 also has discrete 5.1 channel analog
inputs to accommodate the latest processing technology and the possibility of future formats.
The AVC-2500 has unique features you have never seen before on any audio equipment.
Therefore, we strongly advise you take the time to read these instructions thoroughly; you will
need them to fully understand and appreciate its extensive and unprecedented capabilities.
About this Manual
The names of connectors and controls are italicized to help you find what you are looking for
within a particular section. On-screen and front panel display indications are in small caps and
the variable settings or adjustments shown in the displays are bracketed. The drawings on the
following pages are intended as a quick reference guide to explain controls and connectors.
Unpacking and Inspection
Carefully unpack your AVC-2500 Audio Video Controller and locate the enclosed accessories:
•
Universal remote control with 4 AAA batteries
•
Detachable AC cord
•
Omnidirectional calibration microphone with cord and AA battery
•
FM Folded Dipole 300
Ω
Antenna
•
FM 300 ohm to 75
Ω
"balun" matching transformer
•
Threaded DIN to F type 75
Ω
coax FM antenna adapter
•
AM loop antenna
•
(2) 3.5 mm mini plugs for 12V triggers
Be sure to carefully inspect the AVC-2500 for any signs of shipping damage. If you believe you
notice any, contact your Parasound Dealer immediately. Be sure to save both cartons and the packing
inserts for future transport and always pack the carton into a larger protective outer carton before
shipment.
Placement of Your AVC-2500
Install your AVC-2500 near your source equipment so you can use the shortest possible
interconnect cables. Keep your AVC-2500 out of direct sunlight because it could interfere with
the remote control sensor. You should also keep the unit away from heat sources such as hot air
ducts, radiators and moisture sources such as open windows.
Optional Rack Mounting Kit
If you want to rack mount your AVC-2500, you will need to obtain the optional RMK-3 rack
mount kit. When you install the RMK-3 onto the AVC-2500 and remove its four feet, it will
occupy three rack spaces (5 1/4 inches high) in a standard 19” wide equipment rack. Refer to
the RMK-3 instructions for installation procedures. Make certain to use the eight insulated
shoulder washers included with the RMK-3 to prevent metal-to-metal contact between its brackets
and your equipment rack.