Pelco VBP3000 - Manual (Page 8)

Option 2 (Refer to Figure 8)
Figure 8
1. Follow the installation instructions shown in the Option 1.
2. Remove the second monitor and its pouch from the front compartment of the bag.
3. Unfastening the Velcro strap and remove the monitor from the pouch.
4. Rotate the base of the second monitor backward so that it may be placed in an upright
position on a flat surface.
5. Insert one end of the DIN cable into the MONITOR PORT on the side of the detached
monitor, slide the cable through the slot in the bag, and insert the other end into the
MONITOR PORT on rear of the main unit.
8