Planet Technology G.SHDSL Bridge/Router GRT-402 - Manual (Page 60)

PLANET Technology Corp. GRT-101/401/402 User’s Manual
To show the configuration, use the list command:
admin# setup ip_share nat fixed list
Note: The maximum number of entries in the NAT fixed IP address mapping pool is 128.
To save your changes, enter:
admin# write
Another function provided by this GRT series NAT/PAT is the virtual server
mapping. Specific ports on the WAN interface (e.g., WAN 1) are re-mapped to
services inside the LAN. As only 69.210.1.8 (e.g., assigned to WAN 1 from ISP)
is visible to the Internet, but does not actually have any services (other than
NAT off course) running on GRT series, it is said to be a virtual server. For
example, requests with TCP made to 69.210.1.8:80 are remapped to the
server 1 on 192.168.0.2:80, other requests with UDP made to 69.210.1.8:25
are remapped to server 2 on 192.168.0.3:25. To set GRT series for the above
NAT function, use:
admin# setup lan 1 attrib Virtual
admin# setup ip_share pat modify 1 interface 1
admin# setup ip_share pat modify 1 port 80
admin# setup ip_share pat modify 1 server 192.168.0.2 80
admin# setup ip_share pat modify 1 protocol TCP
admin# setup ip_share pat modify 1 name httpd
admin# setup ip_share pat modify 2 interface 1
admin# setup ip_share pat modify 2 port 25
admin# setup ip_share pat modify 2 server 192.168.0.3 25
admin# setup ip_share pat modify 2 protocol UDP
admin# setup ip_share pat modify 2 name mail
To show the configuration, use the list command:
admin# setup ip_share pat list
Note: The maximum number of service mapping supported by GRT series is 10.
To save your changes, enter:
- - 55