Planet Technology G.SHDSL Bridge/Router GRT-402 - Manual (Page 69)

PLANET Technology Corp. GRT-101/401/402 User’s Manual
----- --------------- --------------- --- ----- ------ -------- ------
WAN1 192.168. 1. 1/255.255.255. 0 0/ 32 LLC IPoA Yes
To list active route status currently, type:
admin# status route
Flag Destination / Netmask / Gateway Interface Portname
---- ------------------------------------------ ------------ ---------
S 0.0.0.0/ 0.0.0.0/ 200.0.8.254 200.0.8.1 WAN1
C 200.0.8.0/ 255.255.255.0/ directly 200.0.8.1 WAN1
C 192.168.0.0/ 255.255.255.0/ directly 192.168.0.218 LAN
C 127.0.0.1/255.255.255.255/ directly 127.0.0.1 Loopback
3.14 User Profile
GRT series comes pre-configured with user profile 1 already established, that
is, user “admin” with password of “admin” and menu driven user interface. The
maximum number of user profiles is limited to 5. You can add, delete, modify,
or list the user profiles with the commands in the following examples.
To change anyone of the user name and password, you must provide both
items together. For example, to change the password only to “76gu94t” for
user profile 1 (default user name “admin”), enter:
admin# admin user modify 1 profile admin 76gu94t
For user profile 1 with password “76gu94t”, to change the username to “titan”
type:
admin# admin user modify 1 profile titan 76gu94t
Certainly, you can change both user name and password in one command line.
The maximum length of user name and password is limited to 19.
To set the user interface for an existing user profile, e.g., user profile 1, use
“modify” and “attrib” commands:
admin# admin user modify 1 attrib command
The following commands add a new user profile 2 “test” with password
“83fdi7s”, and set the user interface to menu mode:
admin# admin user modify 2 attrib menu
admin# admin user modify 2 profile test 83fdi7s
- - 64