Panasonic KX-TG1850NZ - Manual (Page 36)

Multi-unit Operation
36
Transferring a call without speaking to
the other handset user
1 During an outside call, press {INT}, then
press the desired handset number.
L
The other handset rings if it is within
range of the base unit and turned on.
2 Press {ih}.
L The outside call rings at the other
handset.
Note:
L k
flashes to indicate the outside call is on
hold.
L If the other handset user does not answer
the call within 1 minute, the call will ring at
your handset again.
TG1850NZ(e).book Page 36 Monday, December 27, 2004 3:22 PM