Panasonic KX-TG2388 - Manual (Page 30)

Caller ID Service
30 For assistance, please visit http://www.panasonic.com/consumersupport
Calling Back using the handset
1
Press {Rcvd calls}, {V}, or {^}.
2
Scroll to the desired caller by pressing
{V}
or {^}.
3
Press {C}, or {s}.
L
The phone number is dialed.
Note:
L In some cases, you may have to edit the
number before dialing.
(For example You may have to delete “1”
and the area code.)
L If a phone number is not displayed in the
caller information, you cannot call that
caller back from the caller list.
Editing a caller’s phone number
before calling back using the
handset
You can edit a phone number in the caller
list by removing its area code and/or the
long distance code “1”.
1
Press {Rcvd calls}, {V}, or {^}.
2
Press {V} or {^} repeatedly to display
the desired item.
3
Press {Select}.
4
Press {Edit} repeatedly until the phone
number is shown in the desired format.
Each time you press {Edit}, the phone
number will be rearranged into one of 3
patterns.
1 Local phone number
2 Area code – Local phone number
3 1 – Area code – Local phone
number
5
Press {C} or {s} to call back.
Note:
L
If Caller ID Number Auto Edit is turned
on (factory preset is on), phone numbers
with the same area code as the number
you edited will now be updated in the
caller list and each time you receive a
call.
L
You can press {OFF} immediately after
pressing {C} or {s} if you wish to
activate the Auto Edit feature without
actually dialing the number you just
edited.
Caller ID number auto edit feature using
the handset
Once you call back an edited number (see
“Editing a caller’s phone number before
calling back using the handset”), the unit
can automatically edit other incoming
phone numbers each time you receive a
call.
For example, you can use this feature to
set the unit to ignore the area code of
callers in your area code, so that you can
call these local numbers using caller
information without dialing the area code.
To activate this feature, you must edit an
item in the caller list (see “Editing a caller’s
phone number before calling back using
the handset”), then call that number. After
that, calls from that caller’s area code will
be edited automatically.
This feature can be turned on or off
(page 42). The default setting is ON.
Note:
L
The handset can remember up to 4 area
codes to be edited. Phone numbers from
the 4 most recently edited area codes
will be automatically edited.
L
This feature will not be activated until
edited numbers are called back.
L If you move to another area, you can
turn this feature off to erase previously
edited area codes. To use this feature
Example:
Example:
Example:
321-5555
555-321-5555
1-555-321-5555