Panasonic KX-TG2388 - Manual (Page 35)

Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport 35
Guide to handset programming
For your reference, a chart of all programmable functions is printed below. Details for each
item can be found on the corresponding pages. To program, press {MENU}, press {V} or
{^}
to scroll through the menu, and press {Select} when the desired menu item or setting
is displayed.
Important:
L
Before programming, make sure the handset and base unit are not being used. The
handset must be operated near the base unit and while off the base unit or charger.
L You can also program features using “direct commands”—special codes that take you
directly to the feature you wish to program and allow you to select the desired setting
(page 37).
During programming:
L
To exit programming, press {OFF} at any time.
L
To go back to the previous menu, press {Back}.
L
If you do not press any buttons for 60 seconds, the handset will exit programming mode.
L If the unit detects a problem, an error message will be displayed (page 60) and/or error
beeps will sound.
Main menu Sub-menu 1 Sub-menu 2 Page
Message play
— — 50
Accessibility Base Announce Dial number
44
HS Announce Pre-Dial number
44
Name List
44
Hearing Aid Mode
— 44
Ringer setting Ringer volume
— 39
Ringer tone
— 39
Incoming call.
— 40
Date and time
— — 15
Talk Caller ID
— — 41