Panasonic CF-R1 - Manual (Page 19)

19
CAUTION
When the charge provided by your battery pack is supplied for only a short period of
time, even after fully charging according to the instructions, it may be time to replace
your battery pack. The battery pack is a consumable item and therefore will require
replacement (CF-VZSU24).
Replacing the Battery Pack
1
Power off your computer ( “ Starting Up/Shutting Down ” )
Do not shut down using the standby function.
Battery Power
Do not touch the terminals on the battery pack and the computer. The battery
pack may no longer function properly if the contacts are dirty or damaged. Also,
the computer may not operate properly.
The battery pack is not charged when the computer is first purchased. Be sure to
charge it before using it for the first time. When the AC adaptor is connected to
the computer, charging begins automatically.
Use only the specified battery pack (CF-VZSU24) with your computer.
2
Turn your computer over and remove the battery pack
Remove the battery pack while sliding the latches inward.
In the standby mode, do not remove/change the battery pack. Re-
moving the pack in the standby mode will erase your data and may
damage the computer.
CAUTION
Latches
3
Be sure the battery pack is properly connected to the connector.
CAUTION
Insert the battery pack
Make sure the battery pack is facing the correct direction, then slide it in
the direction of the arrow, and then check to ensure that the battery pack
is held firmly by the latches on the left and right sides, which indicates
that it is securely inserted.