Panasonic CF-R1 - Manual (Page 24)

24
SD Memory Card/MultiMedia Card
Select [Next], then select the functions you want to use and the SD memory card setting
method
SD Memory Card Security Function
When you initialize an SD memory card, you can provide the card a security function. This function can be used for
purposes such as the following.
Entering a supervisor password in order to start your computer
Entering a password in order to log on to Windows
Entering a password when you want to use the computer while the screensaver is active
In addition, you can set the security function on a single SD memory card for multiple computers. Note, however, that
this can only be done if all of the computers use the same password.
This security function only works in the SD memory card slot. It does not work in devices such as an SD card reader
connected through a USB connection.
An SD memory card must be initialized in order to use the security function. Use the following procedure to initialize
an SD memory card.
Turn on your computer
Insert the SD memory card in the SD memory card slot
Windows XP
When the [Removable disk] appears, select [Take no action], then select [OK].
Start the SD card setup program
Windows 2000
Select [Start] - [Programs] - [Panasonic] - [SD Card setup].
Windows XP
Select [start] - [All programs] - [Panasonic] - [SD Card Setup].
If an SD memory card has not been inserted, the following message appears: “Set the SD card in place.”
Insert an SD memory card and select [Retry].
Leave set* 2 : Add the check mark if you want to leave the SD memory card put in place instead of
entering a password. The card may be removed after the computer is started or after you
log on to Windows.
Set and eject* 2 : Add the check mark if you want to set and eject the SD memory card instead of entering a
password.
* 2 The setting method is set separately for each computer. Different SD memory cards may not use different setting meth-
ods on the same computer.
To change only the setting for [Use when starting computer], change the setting in the [Security] menu of the Setup Utility.
(
page 39 )
* 1 Windows XP
If the check mark is added, the Welcome screen will no longer ap-
pear and the user switching function will be disabled.
Initialization (SD Card Setup)
NOTE
Use when starting computer:
Add the check mark if you want to use the SD memory card
instead of a password entry in order to start the computer. As
many as two SD memory cards can be registered for a single
computer.
Use when logging on to Windows:
Add the check mark if you want to use the SD memory card
instead of a password entry on the Windows logon screen.*
1
1
2
3
4