Panasonic CF-R1 - Manual (Page 8)

8
When [Standby]* or [Hibernate] is selected as the setting for [When I close the lid of my
portable computer:], the computer will enter either the standby or hibernation mode
when the display is closed. Operation will resume when the display is opened. Even if
the display is closed after the computer has entered either the standby or hibernation
mode, operation will resume when the display is opened. If the computer does not
resume when the display is opened, slide the power switch.
* Windows XP : [Stand by]
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or enter
either the standby or hibernation mode again during this time, as this may subse-
quently cause Windows to operate abnormally.
When operation resumes, devices such as a mouse, modem or PC Cards may
not function properly. In such cases, you will need to restart your computer or
reinitialize the individual devices.
Avoid the following until the power is completely turned off when turning off the
computer by using the standby or hibernation functions, or resuming operation
from the standby or hibernation.
Touch the keyboard (excluding password input), touch pad, or power switch.
Connect or disconnect the AC adaptor.
Close or open the display.
Even when a password has been set in the Setup Utility, does not appear
when the computer resumes from the standby or hibernation mode.
If you want to use the security function when using the standby or hibernation
mode, use the Windows password as follows:
Windows 2000
Set the password in [Control Panel] - [Users and Passwords], then add the check
mark for [Prompt for password when computer goes off standby] in [Control Panel]
- [Power Options] - [Advanced].
Windows XP
Select the account to change in [Control Panel] - [User Accounts] and set the
password, then add the check mark for [Prompt for password when computer
resumes from standby] in [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
Slide the power switch
Resuming Operation
CAUTION
Standby/Hibernation Functions