Panasonic AW-RP400E - Manual (Page 11)

$ Assembling the pan/tilt head
1 Attaching the camera mounting base
Attach the camera mounting base to the rotary arm using the
three screws. The mounting direction differs depending on the
installation method used.
2 Attaching the rotary arm
Attach the rotary arm to the rotary head using the four screws.
The mounting direction differs depending on the installation
method used.
3 Mounting the tally lamp
Remove the four screws to remove the top cover.
Remove the two screws to remove the blank panel.
Mount the tally lamp, and secure it using the screws used to
attach the blank panel.
Connect the tally lamp’s connector.
Attach the top cover, and secure it using the four screws.
≥ Tighten up the screws securely to ensure that they will not come
loose during use.
Indoor Pan/Tilt Head AW-PH400
10 (E)
ENGLISH
Installation
(Be sure to ask your dealer to install the unit.)
For a stand-alone installation
For installation on the ceiling
Camera mounting base
Rotary arm
Rotary arm
Rotary head
Tally lamp
Blank panel
Top cover
Camera mounting base
Rotary head