Panasonic KX-TDE200 - Manual (Page 125)

• The default floating extension number for the SVM feature is 591.
Leaving Voice Messages
If the extension user you called is not able to answer your call, and your call is redirected to the message box,
you will hear the greeting message. Then, you can leave a voice message for that extension. It is also possible
to leave a voice message directly in the message box of a desired extension by following the steps below:
To leave a voice message directly to another extension’s message box
PT/SLT/PS
Off-hook. Enter 38. Enter #6.
8 3
C.Tone
6 #
Dial extension number.
extension no.
You hear the
greeting message.
Record
message.
OR
dial key
On-hook or press any
dial key (0–9, , #).
• Voice message recording will stop, you will hear a notification tone, and the call will be
disconnected, in the following cases:
a. the recording time for the voice message reaches the preprogrammed limit. (default: 120
seconds)
b. the recording space for the SVM feature reaches the limit.
• When you are on the phone, you can transfer the call directly to the message box of a desired
extension by placing the call on hold temporarily, then pressing 38 + #6 + the desired
extension number. This allows the caller to leave a voice message in the message box of the
desired extension.
Listening to Voice Messages Left by Callers
When a caller leaves a voice message, information about that caller is also recorded as the SVM Log. The
SVM Log can be viewed using the display of a PT or PS by pressing the Message button.
Document Version 2008-10 Operating Manual 125
1.3.64 SVM (Simplified Voice Message)