Safety notices – Panasonic KX-TDE200 User Manual
Page 5
Notes for SIP Extension Users
Before using a SIP Extension, please read the following notes.
a.
The following features are available for SIP Extension users:
–
Making calls
–
Answering calls
–
Holding calls
–
Transferring calls (You cannot go on-hook before the transferred party answers.)
b.
The available operations using feature numbers are limited. Refer to the telephone types displayed at the
top left of each operation.
c.
The operations for Call Forwarding (FWD)/Do Not Disturb (DND)/Personal Speed Dialing using the feature
number, are not available. However, it is possible to enable these features at SIP Extensions if set through
system programming.
Also, a KX-HGT100 user can store and dial personal speed dialing numbers in his/her telephone through
KX-HGT100 programming.
d.
The tones listed in "4.3.1 Tone" are not available for SIP Extension users. Tones or the tone types may
vary depending on the type of telephone being used. For example, when you put a call on hold, a specific
tone for the SIP Extension may be heard, or no tone may be heard.
e.
Any number pressed while hearing a Busy/DND/Reorder tone, such as the feature number to activate
Automatic Callback Busy, will be ignored.
f.
The operations for SIP Extensions may differ from the steps in this manual, and may vary depending on
the type of telephone being used.
Safety Notices
Please observe the safety notices in this manual in order to avoid danger to users or other people, and prevent
damage to property.
The notices are classified as follows, according to the severity of injury or damage:
WARNING
This notice means that misuse could result in death or serious injury.
CAUTION
This notice means that misuse could result in injury or damage to property.
Trademarks
•
The Bluetooth
®
word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
•
All other trademarks identified herein are the property of their respective owners.
Document Version 2008-10
Operating Manual
5
Feature Highlights